![background image](http://html1.mh-extra.com/html/quantum/snc-4000/snc-4000_user-manual_4004472121.webp)
SNC 4000 User’s Guide
115
SNC4000 > sncFeatureEnable "enable"
value = 0 = 0x0
Data Mover Module License is Valid
If
value = 1 = 0x1
message is displayed, it means the license is already installed and Data Mover
Module is already enabled.
If the
value = -1 = 0xffffffff message
is displayed, it means the license is not already installed
and you do need to enter the license key.
snmpCommunitiesShow
The
snmpCommunitiesShow
command displays the list of SNMP community strings in use by the SNC
4000.
SNC4000 > snmpCommunitiesShow
ReadCommunity ViewIndex
-----------------------------
pub 1
ReadCommunity ViewIndex
-----------------------------
public 1
icmp 2
WriteCommunity ViewIndex
-----------------------------
priv 1
private 1
TrapCommunity
------------------------------
private
value = 9 = 0x9
SNMP community strings serve to group network devices into logical collections for management purposes.
The community string must match on both the ADIC Management Console Server and the SNC 4000 you
wish to manage. The default settings do match. Use the ADIC Management Console to view or edit strings
that apply to the Server.
For more information, see the
ADIC Management Console User’s Guide.
To view or edit strings that apply to the SNC 4000, use the snmp... commands explained below.
snmpHelp
The
snmpHelp
command displays a list of the snmp commands.
SNC4000 > snmpHelp
snmpCommunitiesShow
snmpReadCommunityAdd "string"
snmpReadCommunityRemove "string"
snmpTrapCommunitySet "string"
snmpWriteCommunityAdd "string"
snmpWriteCommunityRemove "string"
trapDestAdd "ipaddress"
trapDestRemove "ipaddress"
trapDestShow
See User’s Guide for more information
value = 0 = 0x0
Summary of Contents for SNC 4000
