116
Service Port Command Reference
snmpReadCommunityAdd “string” ,[view]
The
snmpReadCommunityAdd
command adds the specified string to the list of accepted strings for SNMP
Read operations (Get and GetNext). The View switch must be set to “1” to be accepted by the ADIC
Management Console.
For more information, see the
ADIC Management Console User’s Guide
.
SNC4000 > snmpReadCommunityAdd "adic",1
Success
value = 4 = 0x4
snmpReadCommunityRemove “string”
The
snmpReadCommunityRemove
command removes the specified string from the list of accepted strings
for SNMP Read operations.
SNC4000 > snmpReadCommunityRemove "adic"
Success
value = 3 = 0x3
snmpTrapCommunitySet “string”,[view]
The
snmpTrapCommunitySet
command sets the community string passed with all SNMP traps. The View
switch must be set to “1” to be accepted by the ADIC Management Console.
For more information, see the
ADIC Management Console User’s Guide.
SNC4000 > snmpTrapCommunitySet "adic",1
Success
value = 8 = 0x8
snmpWriteCommunityAdd “string”,[view]
The
snmpWriteCommunityAdd
command adds the specified string to the list of accepted strings for
SNMP Write operations (Set). The View switch must be set to “1” to be accepted by the ADIC Management
Console.
For more information, see the
ADIC Management Console User’s Guide
.
SNC4000 > snmpWriteCommunityAdd "adic",1
Success
value = 0 = 0x0
snmpWriteCommunityRemove “string”
The
snmpWriteCommunityRemove
command removes the specified string from the list of accepted
strings for SNMP Write operations.
SNC4000 > snmpWriteCommunityRemove "adic"
Success
value = 0 = 0x0
sysConfigShow
The
sysConfigShow
command displays current system parameter settings. The display shows whether
or not the SNC 4000’s Command and Control interface is enabled or disabled and the LUN that is assigned
to it, whether or not enhanced tape performance features are enabled, the MAC address of the Ethernet
port; and the SNC 4000’s FC Node address.
SNC4000 > sysConfigShow
Current System Parameter Settings:
Comamnd and Control Device (CC) : 0 Enabled
Launch Internet Ex
Summary of Contents for SNC 4000
