Quantum SNC 4000, User Manual

Page: 72 / 164

66 Service Port Command Reference
fcConnTypeGet Display the current setting of the FC port’s
connection type 79
fcConnTypeSet Set the type of connection for a FC port 79
fcFibreSpeedGet Display maximum and current speeds of FC port 80
fcFibreSpeedSet Set FC port speed 80
fcGbicShow Display the SFP information for each installed SFP 80
fcPortModeGet Display the mode for the specified FC port 81
fcPortModeSet Set the mode for the FC port 81
fcRestart Restart the FC port 82
fcShow Display FC interface status 82
fcShowDevs Display attached SCSI and FC Target Devices
from FC port perspective 84
fcShowNames Display Node and Port names for the FC 84
fcTxDisable Disable the FC port transmitter 84
fcTxEnable Enable or re-enable the FC port transmitter 84
setFcFrameSize Set Frame Size for specific FC port 107
setFcHardId Set Loop ID for the FC port 107
setHost Set Host OS type for the FC port 107
sysNodeNameModeSet Change the FC Node Name mode 117
sysNodeNameModeShow Display the current FC Node Name mode 117
targets Display attached SCSI and FC Target devices 120
Flash File System
cd Set current working path 72
ll List directory contents in long format 93
ls List directory contents 93
rm Remove (delete) a file 101
rz Initiate a receive Zmodem file transfer session 103
sz Initiate a send Zmodem file transfer session 120
Health Check
hlthChkIntervalGet Display Health Check Interval 87
hlthChkIntervalSet Set Health Check Interval 87
Table 7 Commands Listed Alphabetically by Function
Command or Command
Group
Description Page