WORKBENCH ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
Cordless drill with #2 phillips head bit & 18” magnetic extension,
3/8" and 5/16” magnetic socket bit.
BEFORE ASSEMBLING THE WORKBENCH
Read through the assembly instructions to
familiarize yourself with the order in which the
parts are assembled. We suggest that you clear
& vacuum the area where the bench is to be
assembled. It is important that the bench is
assembled in the same sequence as instructed.
HARDWARE & GMI COMPONENTS
All assembly hardware is provided. Full size photos
accompany each step where hardware is needed.
STEP 1
Assemble the modesty panels to the base
cabinets. Use four 1/4-20 x 1/2" Bolts with
the 3/8" magnetic socket for each modesty
panel.
**Your base cabinets may be different than
those shown. Follow the same instructions**
Modesty Panel
STEP 2
Hook the (Optional) wire
management tray over the top
lip of the modesty panel.
For (3) base configuration benches
the assembly process is the same as
shown. The wire tray flange will clip over
the modesty panel flange along the top
edge.
Wire Management Tray
Optional
DT-XXX-Z Configuration
1/4-20 x 1/2”
Flange Head Bolt
