Parker AC890PX Series, Product Manual

Page: 171 / 517

8-12
Keypad Menus
AC890PX AC Drive
The QUICK SETUP Menu
NOTE
For more information about these and additional parameters accessible using the DSE Configuration Tool, refer to
Appendix D or the DSE Configuration Tool.
The menu system has been designed for use with the DSE Configuration Tool. Hence, the tool is the preferred method of
programming, however it is possible to edit some parameters using the keypad.
The parameters most likely to require attention are contained in the QUICK SETUP menu at level 1.
Saving Your Modifications
When parameter values are modified the new settings must be saved. The drive will not retain new settings during power-
down unless they have been saved. If using the keypad, refer to Chapter 7 : "The Keypad" - Quick Save Feature.
NOTE
The “Range” for a parameter value is given in the Configurable Parameters Table. Ranges for outputs are given as
“—.xx %”, for example, indicating an indeterminate integer for the value, to two decimal places.
The Default values in the table below are correct for when the US country code is selected and a 460V 300 Hp 60Hz Frame
G power board is fitted. Some parameters in the table are marked:
* Value dependent upon the Language field of the Product Code, e.g. US
** Value dependent upon the overall “power-build”, e.g. 460V, 300 Hp
The values for these parameters may be different for your drive/application. Refer to Appendix D: "Programming" - Product
Related Default Values.