Section 400-Programming
Chapter 1. System Programming (FF1)
DBS-2.3/9.2-400
DBS Manual - Revised April 2000
Page 1-65
PBX Settings
PBX Access Code(s)
Software Version: All Versions
Address: FF1 2# 3# (1-8)# (0-999 or 0*-99*)#
Description
Use this address to program PBX Access Codes for DBS systems installed
behind a PBX or Centrex, with Toll Restriction (TRS) enabled. By default,
no PBX Access Codes are created.
Creating a PBX Access Code in this address will “activate” the PBX feature;
the DBS will recognize the first dialed digits as the PBX Access Code
(separate from the outgoing phone number being dialed). Otherwise, the
DBS will regard the Access Code as part of the outgoing phone number.
The DBS can use as many as 8 different PBX Access Codes. Each Access
Code can be one, two, or three digits long.
Programming
To program a PBX Access Code ...
To reset PBX Access Codes to default (*** no codes created) ...
Related Programming
Automatic Pause Position for PBX Access Codes: FF1 2# 3# (9-18)# (1-3)#
Trunk Port Type: FF2 (Trunk)# 10# (1 or 2)#
FF1 2# 3# (1-8)# (0-999 or 0*-99*)#
Access Code Required to Dial the PBX
(*=wildcard; press FF11 to enter it)
Access Code Number
FF1 2# 3# (1-8)# CONF ON/OFF
Access Code Number
Summary of Contents for DBS-2.3-400
