Panasonic DBS-2.3-400, Programming Manual

Page: 33 / 578

Section 400-Programming Introduction to DBS Programming
DBS-2.3/9.2-400 DBS Manual - Revised April 2000 Intro-11
FF1 2# 1# 36# (0-2)# DID/DNIS to a Voice Mailbox
(CPC-B 6.0 or higher)
0 (No DID/DNIS
digits trans-
mitted) 1-44
FF1 2# 1# 37# (6 char.)# DID/DNIS Answer Code
(CPC-B 6.0 or higher)
None 1-46
FF1 2# 1# 38# (0-2)# LCD Timer for Caller ID
(CPC-AII/B 6.1 or
higher)
0 (5 sec) 1-48
FF1 2# 1# 39# (0 or 1)# Internal Hold Tone
(CPC-AII/B 7.0 or higher)
0 (Disabled) 1-49
FF1 2# 1# 40# (0 or 1)# Door Opener Access Code Required
(CPC-AII/B 7.0 or higher)
0 (Not required) 1-50
FF1 2# 1# (41 or 42)# 1# (0 or 1)# API Port Type
(CPC-AII/B 7.0 or higher)
0 (Standard API) 1-51
FF1 2# 1# (41 or 42)# 2# (0 or 1)# API Baud Rate
(CPC-AII/B 7.0 or higher)
0 (9600 bps) 1-52
Program Address Topic Default Page
FF1 2# 2#: Serial Port Parameters (TTY Settings) 1-53
FF1 2# 2# 1# (0 or 1)# Parity Check 1 (On) 1-53
FF1 2# 2# 2# (0 or 1)# Odd/Even Parity 1 (Even) 1-54
FF1 2# 2# 3# (1-4)# Baud Rate 4 (9600 bps) 1-55
FF1 2# 2# 4# (1-3)# Stop Bit Length 1 (1 bit) 1-56
FF1 2# 2# 5# (3 or 4)# Data Length 4 (8 bits) 1-57
FF1 2# 2# 6# (0 or 1)# SMDR Printing Mode 1: Outbound and
Inbound 1 (Outbound and
Inbound) 1-58
FF1 2# 2# 7# (0 or 1)# SMDR Printing Mode 2: Long-Distance and
Local Calls 1 (Long-distance
and local) 1-59
FF1 2# 2# 8# (0 or 1)# SMDR Printing Mode 3: Header Title 0 (No header
titles) 1-60
FF1 2# 2# 9# (0 or 1)# Serial Port Flow Control (XON / XOFF) 1 (No DBS flow
control) 1-61
FF1 2# 2# 10# (0 or 1)# RAI Baud Rate 0 (300 bps) 1-62
FF1 2# 3#: PBX Settings 1-63
FF1 2# 3# (1-8)# (0-999 or
0*-99*)# PBX Access Code(s) None 1-63
FF1 2# 3# (9-18)# (1-3)# Automatic Pause Position for PBX Access
Codes
None 1-64
FF1 2# 4#: External (UNA) Relay Control 1-66
FF1 2# 4# 1# (0 or 1)# Ring Patterns for UNA Terminals (M, C and
B) 0 (1 sec on/
3 sec off) 1-66
FF1 2# 4# (2-9)# (0 or 1)# External Page Interface Control for Paging
Groups 0 (Internal paging
only) 1-67
FF1 2# 5#: Class of Service 1-68
FF1 2# 5# (1-8)# (1-21)# (0 or 1)# Extension Class of Service 0 (All features
disabled) 1-68
Program Address Topic Default Page