Panasonic DBS-2.3-400, Programming Manual

Page: 134 / 578

Chapter 1. System Programming (FF1) Section 400-Programming
Page 1-90 DBS Manual - Revised April 2000 DBS-2.3/9.2-400
Door Phone Ring Timeout Timer
Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 9# (DoorPhone)# 5# (0-15)#
Description
This address sets the amount of time (in seconds) that a door phone will ring
an extension before it goes on-hook (extension stops ringing). This applies to
door phones connected to digital extension ports only (not trunk ports).
If the door phone caller re-initiates the call before this Timer is up, the Timer
will automatically reset and the extension will begin ringing again.
Programming
Table 1-8. Door phone ring timer values
Related Programming
Door Phone Ring Pattern: FF1 2# 9# (DoorPhone)# 6# (0-5)#
Notes
Reset Requirement. If changing the Ring Timer setting, activate the change
by unplugging the door phone from its port and plugging it back in.
Setting Value Setting Value
0 5 seconds 8 45 seconds
1 10 seconds 9 50 seconds
2 15 seconds 10 55 seconds
3 20 seconds 11 60 seconds
4 25 seconds 12 65 seconds
5 30 seconds 13 70 seconds
6 35 seconds 14 75 seconds
7 40 seconds 15 80 seconds
FF1 2# 9# (1-4)# 5# (0-15)#
Door Phone Number
(1-4)
Ring Timer
Default:
3 (20 seconds)
(see table below)