manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 397

Section 400-Programming

Chapter 7. Toll Restriction (FF7)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 7-11

Operator Access

Software Version:   CPC-A Version 4.0 or higher; CPC-AII/B Version 6.0 or higher
Address:   FF7  1#  18#  (ExtPort)#  (0 or 1)#

Description

This Operator Access switch works only if the DBS system is set to use the 

new NANP dialing plan

 (FF7 1# 17# 1#).  Also, this switch applies only to 

TRS types 2-6 (TRS types 0 and 1 do not allow outbound dialing; TRS type 7 
allows all dialing).

Use this address to block extension(s) from being able to access a trunk and 
dialing “0”, “00”, “10XXX0”, or “101XXXX0” to reach an operator.  This 
prevents a user from being able to make a restricted phone call by asking the 
operator to place the call for him.

Programming

Related Programming

Dialing Plan Switch:   FF7  1#  17#  (0 or 1)#

Notes

Timeout for Operator Calls.

   If this switch is set to “Deny” (default) and an 

extension user accesses a trunk and dials the operator, the system will wait 6 
seconds before automatically disconnecting the call.  However, if the user 
dials additional digits within the 6 seconds, the DBS will check other 
switches such as 

“International Calling On Extensions”

, 

“7-Digit Toll 

Restriction”

, etc., to allow or deny the call.

FF7  1#  18#   (1-144)#  (0 or 1)#

 

  

0=Deny operator calls.

1=Allow operator calls.

Extension Port

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands