Panasonic DBS-2.3-400, Programming Manual

Page: 339 / 578

Section 400-Programming Chapter 4. Ringing and Hunt Groups (FF4)
DBS-2.3/9.2-400 DBS Manual - Revised April 2000 Page 4-7
Hunt Group Pilot Numbers
Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 3# (HuntGrp)# 1# (11-69 or 101-699)#
Description
Use this program to assign a “pilot” extension number to a hunt group. This
“pilot” number can be dialed from any intercom phone to reach the hunt
group. An example is dialing “500” to reach a Voice Mail hunt group.
Each hunt group must have a pilot number assigned to it in order for the
hunt group application to work -- including ring assignments to hunt groups,
call transfers to hunt groups, etc.
Note: This address requires an extension number entry, rather than an
extension port entry. In fact, the hunt group pilot number cannot also be
assigned to an extension port (double-check the Extension Numbers address
FF3 ExtPort# 1# ExtNumber#).
Programming
To assign a Hunt Group Pilot Number ...
To clear a Pilot Number ...
Related Programming
Hunt Group No Answer Timer: FF1 3# 28# (0-15)#
Extension Numbers: FF3 (ExtPort)# 1# (ExtNo.)#
CO Day Ring Assignments For Hunt Groups: FF4 1# (HuntGrp)#
(Trunk)# (0 or 1)#
CO Night Ring Assignments For Hunt Groups: FF4 2# (HuntGrp)#
(Trunk)# (0 or 1)#
FF4 3# (1-8)# 1# (11-69 or 101-699)#
Hunt Group No. Pilot Extension Number
(can’t be Primary Attendant
extension number 10 or 100)
FF4 3# (1-8)# 1# CONF ON/OFF
Hunt Group No.