manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

The Panasonic DBS-2.3-400 Programming Manual is a comprehensive guide for users to efficiently navigate through the features and settings of this product. With step-by-step instructions, users can easily program their device for personalized usage. Download this manual for free at manualshive.com, your go-to destination for user manual downloads.

Share
Download
background image

Index-6

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

Index

Section 400-Programming

I

Incoming Calls (T1)--

detection timer........................................ 1-153
dialing method........................................ 1-194
signaling type ......................................... 1-191

Initializing New DBS Systems

................ Intro-4

Intercom Calls--

assigning to FF key .................................... 5-6
prime line pickup...................................... 3-15
recall timer, Attendant-held.................... 1-116
recall timer, Attendant-transferred ......... 1-118
recall timer, extension-held .................... 1-117
recall timer, extension-transferred.......... 1-119
tone/voice calling from an extension ....... 1-21
tone/voice calling from Attendant............ 1-20

Internal Hold Tone

..................................... 1-51

International Calls--

restricting on extensions with TRS .......... 7-12
restricting on trunks with TRS ................... 7-5

IXC (Inter-Exchange Carrier)--

formats..................................... 7-3, 7-11, 7-14

K

Key Bank Hold

............................................ 1-14

Key Phones (K-Tel)--

auto-redial on............................................ 3-58
setting terminal type for ............................. 3-5

L

LCD--

SSD display on ......................................... 1-10
timer for Caller ID.................................... 1-50

LCR (Least Cost Routing)--

1+ required ............................................... 1-24
access.......................................................... 1-8
activating .................................................... 8-4
add digits .................................................. 8-14
area codes in ............................................... 8-6
call processing in ........................................ 8-4
delete digits .............................................. 8-13
forced, on extensions.................................. 3-8
office codes in ............................................ 8-7
overview ..................................................... 8-2
PBX, using with ......................................... 8-5
pooled trunks in .......................................... 2-5
requirements ............................................... 8-2

setup ........................................................... 8-2
special area codes in .................................. 8-8
special numbers not processed................... 8-6
special office codes in................................ 8-9
time priority route tables, building .......... 8-10
trunk groups in ......................................... 8-12

Line Coding for T1

................................... 1-163

Local Calls--

restricting office codes for ....................... 7-17

Loop-Start Trunks--

considerations .......................................... 2-18
trunk circuit type ...................................... 2-18

M

MCO (Multi-Central Office)--

AFP default FF key feature assignments . 5-11
enabling an extension for ......................... 3-53

Meet-Me Answer--

assigning to FF key .................................... 5-6

Menus--

displayed during a trunk call.................... 3-31
displayed during Call Waiting tone ......... 3-35
displayed during idle mode...................... 3-23
displayed during intercom dial tone......... 3-25
displayed when accessing CO dial tone... 3-29
displayed when calling an extension ....... 3-27
displayed when dialing a busy extension. 3-37
displayed when receiving a page ............. 3-33
soft key (illustr.).........................................A-1

Message Waiting Answer--

assigning to FF key .................................... 5-6

MFR Card--

in remote programming ............................. B-2

ML (Multi-Line)--

enabling an extension for ......................... 3-53
ringback tone from................................... 3-42

ML/MCO--

and call coverage groups.......................... 4-18
assigning to FF key .................................... 5-6
separation ................................................. 3-53

Multiple DID/DNIS

.................................... 1-41

Mute--

assigning to FF key .................................... 5-6

N

Name Assignments--

extensions................................................... 6-3

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS-2.3-400

Jabra Pro 9470 Mono Quick Start Manual preview
Pro 9470 Mono
Brand: Jabra Pages: 4
Uniden WDECT 2300 Quick Start Manual preview
WDECT 2300
Brand: Uniden Pages: 60
Alcatel Sigma 110 Voice Dou User Manual preview
Sigma 110 Voice Dou
Brand: Alcatel Pages: 2
Logik L05CBIG10 Instruction Manual preview
L05CBIG10
Brand: Logik Pages: 16
AT&T TL92273 Quick Start Manual preview
TL92273
Brand: AT&T Pages: 2
GE 21026 User Manual preview
21026
Brand: GE Pages: 120
Telular SX7P Manual preview
SX7P
Brand: Telular Pages: 64
Telstra COLOMBO NEUE User Manual preview
COLOMBO NEUE
Brand: Telstra Pages: 36
Telongo LX320 Installation Manual preview
LX320
Brand: Telongo Pages: 3
Southwestern Bell Freedom Phone FF2115HT Owner'S Manual preview
Freedom Phone FF2115HT
Brand: Southwestern Bell Pages: 14
switel DFT 107 series Operating Instructions Manual preview
DFT 107 series
Brand: switel Pages: 116
switel DF722 Operating Instructions Manual preview
DF722
Brand: switel Pages: 136
Swissvoice Xtra 1110 User Manual preview
Xtra 1110
Brand: Swissvoice Pages: 10
Denwa Communications DW-710 User Manual preview
DW-710
Brand: Denwa Communications Pages: 76
Doro 615r Manual preview
615r
Brand: Doro Pages: 12
Doro 530+1FM Manual preview
530+1FM
Brand: Doro Pages: 12
Doro 140R Manual preview
140R
Brand: Doro Pages: 36
Avaya 9101 Instruction Manual preview
9101
Brand: Avaya Pages: 16

Brands by name

Popular brands

Load more brands