manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 531

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page H-1

Appendix H  CPC-EX 2.1 Updates

CPC-EX Version 2.1 adds support for the “Call Record” feature available with 
PanaVOICE

™

 Voice Mail systems. In addition, several quality improvements are 

incorporated in Version 2.1.

CAUTION:  When using the “Call Record” feature in some states it is 
illegal to record telephone communications without the consent of all 
parties. In other states, it is illegal to record without the consent of one 
party. These laws do not make the Call Record feature on a telephone 
system illegal. Before activating this feature, please check applicable 
state and federal laws.

Call Record

Requires PanaVOICE equipped with Software Version 2.1 (Q32136) or later. 

Description

The call record feature allows a user to record a trunk conversation at the 
press of preassigned 

Call Record

 FF key. The conversation is saved to the 

user’s voice mail box.

Programming

Note:

Call Recording may be restricted to selected ports on the voice mail 

system. This may be done by creating a new “Call Recording” hunting group 
consisting only of the extension numbers for the voice mail ports to be used 
for call recording. Then program the 

Call Record

 key using this new hunt 

group’s pilot number. For instance, if you are using a 6-port voice mail and 
want to restrict call recording to two of the ports in order to keep the other 
four free for voice mail use, you may create an hunting group that consists 
only of the two call recording ports and use its related pilot number for the 

Call Record

 key assignments.

Operation

To record a trunk call:

To record a trunk call, press the 

Call Record

 key. The LED flashes 

while the connection to the Voice Mail recording port is being 
established. This may take a few seconds. When recording begins, the 

FF5 (ExtPort)# (KeyNo.)# CONF PROG AUTO FF11

 

to assign a Call Record key... 

(Voice Mail Pilot No.) HOLD

 

See note below

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands