manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 117

Section 400-Programming

Chapter 1. System Programming (FF1)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 1-73

Assigning 9999 as Account Code 100 ...

To assign “9999” as Account Code 100, enter this address:

FF1  2#  6#  100#  1#  9999#

Related Programming

Toll Restriction For Verified Forced Account Codes:  FF1  2#  6#  (1-100)# 
2#  (0-7)# 

Forced Account Codes:  FF3  (ExtPort)#  5#  (0 or 1)#

Toll Restriction Settings:  FF7 addresses

Notes

Forced Unverified Account Codes.

   With CPC-AII and CPC-B versions 

prior to 6.0, Unverified Account Codes can only be used on a voluntary basis 
-- Forced Unverified is not available.  However, beginning with Version 6.0, 
Forced Unverified Account Codes can be used.  See FF3 (ExtPort)# 5# (0-2)# 
for more information.

TRS Interaction.

  The default TRS type for Verified Forced Account Codes 

is “0,” which generally allows intercom calling only.  Therefore, if you assign 
an account code but do not assign a TRS value to it, the Account Code will 
restrict outside dialing.

Assignment Restriction.

  “0000” cannot be assigned as an Account Code.

SMDR Format.

  In the SMDR report, the Account Code that was used to 

access the CO trunk will appear starting in position 70 of the call record line.

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands