manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 22

About This Section

Section 400-Programming

- xxvi -

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

Program Sequence

Although FF key programming separates DBS programs into groups, it is 
important to note that the numerical sequence of the FF keys and the 
addresses within them, does not necessarily represent a logical progression 
for programming a particular feature or application. For example, some DID 
settings are in FF1 (System), while others are in FF2 (Trunks), FF3 
(Extensions) and FF6 (Names and Messages).

In 

Section 400,

 each program explanation includes related information about 

the feature or application it affects (if any). Also, the forms in 

Section 450

 of 

the DBS Manual provide a more concise view of programming DBS features.

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands