manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 253

Section 400-Programming

Chapter 2. Trunk Programming (FF2)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 2-5

Pooled Trunk Access for Group “9”

Software Version:   All Versions
Address:   FF2  (Trunk)#  3#  (0 or 1)#

Description

Use this feature to place a trunk in a group from which trunks are 
automatically chosen for outbound dialing. When you dial “9” from an SLT 
or digital extension, or press an FF key that is set as a pooled trunk key, any 
available trunk in the group will be accessed.

The trunk selection is made from the 

highest

 trunk number in the group to the 

lowest

.

Programming

Related Programming

LCR Access:   FF1  2#  1#  3#  (0 or 1)#

Notes

Interaction with LCR.

    Set the “LCR Access” option (address FF1 2# 1# 3#) 

so that dialing “9” indicates a Pooled Trunk call. If this option is set so that 
dialing “9” indicates an LCR call, trunk selection will default to pooled trunk 
line access group 9 if all lines that could be used for LCR access are busy.

Required Hardware Setting.

 To use pooled trunks, Strap S1 on the CPC card 

must be cut. See 

Section 300-Installation

 for instructions.

FF2  (1-64)#  3#  (0 or 1)#

 

  

0=Trunk is not included in access group “9”. 

1=Trunk is included in access group “9”.

Trunk Number

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands