manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 57

Section 400-Programming

Chapter 1. System Programming (FF1)

DBS-2.3/9.2-400

DBS Manual - Revised April 2000

  Page 1-13

Onhook Transfer

Software Version:   All Versions
Address:   FF1  2#  1#  8#  (0 or 1)#

Description

This address determines whether a call can be transferred without pressing 
the PROG key.

• If Onhook Transfer is enabled (default setting), the user can transfer a call 

by placing the call on hold, dialing the extension number, and then hanging 
up.

• If Onhook Transfer is disabled, the user places the call on hold, dials the 

extension number, then presses PROG (or “8” if using an SLT or DSLT 
phone) and hangs up to transfer the call.

Programming

Related Programming

Attendant Transfer Recall Timer for CO Calls:  FF1  3#  4#  (0-12)#

Extension Transfer Recall Timer for CO Calls:  FF1  3#  5#  (0-12)#

Attendant Transfer Recall Timer for Intercom Calls:  FF1  3#  24#  (0-12)#

Extension Transfer Recall Timer for Intercom Calls:  FF1  3#  25#   (0-12)#

Notes

Call Transfer Limitation With CPC-A.

  In CPC-A versions, only trunk calls 

can be onhook-transferred to other extensions.  In CPC-AII and CPC-B, both 
trunk and intercom calls can be onhook-transferred.

Transfer Recalls.

  If a transferred call recalls to an extension and is not 

answered, it will automatically transfer to the attendant.  Timing for the 
attendant transfer is controlled by the Attendant Call Reversion Timer (FF1  
3#  10#  0-12#).

VAU Interaction.

   If a VAU (Voice Announce Unit) is used, enable Onhook 

Transfer to allow the VAU to transfer calls.

FF1  2#  1#  8#   (0 or 1)#

  

0=Onhook Transfer is disabled.

1=Onhook Transfer is enabled.

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands