Panasonic DBS-2.3-400, Programming Manual

Page: 39 / 578

Section 400-Programming Introduction to DBS Programming
DBS-2.3/9.2-400 DBS Manual - Revised April 2000 Intro-17
FF3 (1-144)# 14# (0 or 1)# Station Message Detail Recorder (SMDR)
Report 1 (Extension is
included in
SMDR report) 3-18
FF3 (1-144)# 15# (0-4)# Offhook Signal Volume 2 (Mid-level) 3-19
FF3 (1-144)# 16# (0 or 1)# Offhook Signal Pattern 0 (Repeated tone
burst) 3-20
FF3 (1-144)# 17# (0 or 1)# PSD Name Display on Large-Sized LCD
Phones 0 (5 PSD names) 3-21
FF3 (1-144)# (18-25)# (0 or 1)# Page Group Extensions 0 (None) 3-22
FF3 (1-144)# 26# (0-24/39)# Display When Idle 0 (Prev. menu) 3-23
FF3 (1-144)# 27# (0-24/39)# Display During Intercom Dial Tone 0 (Prev. menu) 3-25
FF3 (1-144)# 28# (0-24/39)# Display When Calling an Extension 0 (Prev. menu) 3-27
FF3 (1-144)# 29# (0-24/39)# Display When Accessing CO Dial Tone 0 (Prev. menu) 3-29
FF3 (1-144)# 30# (0-24/39)# Display When Conversing on a CO Trunk 0 (Prev. menu) 3-31
FF3 (1-144)# 31# (0-24/39)# Display When Receiving a Page 0 (Prev. menu) 3-33
FF3 (1-144)# 32# (0-24/39)# Display After Receiving a Call Waiting Tone 0 (Prev. menu) 3-35
FF3 (1-144)# 33# (0-24/39)# Display When Dialing a Busy Extension 0 (Prev. menu) 3-37
FF3 (1-144)# 34# (0 or 1)# Extension Directory Display
(CPC-AII; CPC-B 2.0 or higher)
0 (5 names) 3-39
FF3 (1-72)# 34# (0 or 1)# VAU Port Assignment
(CPC-A 3.3 or higher)
(see page 3-56)
FF3 (1-144)# 35# (0-8)# Extension Class of Service Assignment
(CPC-AII; CPC-B 3.1 or higher)
0 (Class 0; all
features
allowed) 3-40
FF3 (1-144)# 35# (0000-9999)# Inbound DID Dial Numbers
(CPC-B 2.0 only)
No assignment 3-41
FF3 (1-72)# 35# (0 or 1)# AEC Disconnect
(CPC-A 3.3 or higher)
0 (Disabled) 3-41
FF3 (1-144)# 36# (0-2)# Ringback Tone From ML Keys 0 (Ringback, then
busy tone) 3-42
FF3 (1-144)# 37# (1-2 or 7-8)# Station Port Class
(CPC-B 4.0 or higher)
Automatically
assigned 3-43
FF3 (1-144)# 38# (0 or 1)# SLT Hookflash
(CPC-B 3.1 or higher)
0 (Broker’s hold) 3-45
FF3 (1-144)# 39# (0-9)# Extension Ring Pattern 0 (Determined by
CO) 3-46
FF3 (1-144)# 40# (0 or 1 )# Digital SLT Receiving Volume 0 (Normal) 3-48
FF3 (1-144)# 41# (0001-9999)# Auto Set Relocation Code Not set 3-49
FF3 (1-144)# 42# (0-3)# Permanent Call Forward Type 0 (Off) 3-51
FF3 (1-144)# 43# (10-69 or 100-699)# Permanent Call Forward Extension No assignment 3-52
FF3 (1-144)# 44# (0 or 1)# ML/MCO Separation 0 (MCO keys) 3-53
FF3 (1-144)# 45# (0 or 1)# VAU Hunting Priority 0 (No priority) 3-54
FF3 (1-144)# 46# (0 or 1)# AEC Disconnect 0 (Disabled) 3-55
FF3 (1-144)# 47# (0 or 1)# VAU Port Assignment 0 (Off) 3-56
FF3 (1-144)# 48# (0 or 1)# Hot Dial Pad
(CPC-AII/B 7.0 or higher)
0 (Disabled) 3-57
FF3 (1-144)# 49# (0 or 1)# Auto-Redial on Extensions
(CPC-AII/B 7.0 or
higher)
1 (Enabled) 3-58
Program Address Topic Default Page