Panasonic DBS-2.3-400, Programming Manual

Page: 194 / 578

Chapter 1. System Programming (FF1) Section 400-Programming
Page 1-150 DBS Manual - Revised April 2000 DBS-2.3/9.2-400
Release Acknowledge Timer
Software Version: CPC-B Version 4.0 or higher
Address:
FF1 8# 4# 2# 4# (0-15)#
Description
Determines how long the DBS waits for the CO to acknowledge a disconnect
signal (240 seconds by default).
Once this timer expires, the DBS will abandon the call even if the CO has not
acknowledged the disconnect. This allows the DBS to disconnect idle T1
trunks if the CO is not signaling properly.
Programming
Table 1-40. Release Acknowledge Timer values
Setting Value
0 1 second
1 2 seconds
2 5 seconds
3 10 seconds
4 20 seconds
5 30 seconds
6 60 seconds
7 90 seconds
8 120 seconds
9 240 seconds
10 480 seconds
11 960 seconds
12 1,080 seconds
13 1,420 seconds
14 1,920 seconds
15 An infinite number of seconds
FF1 8# 4# 2# 4# (0-15)#
Release Acknowledge Timer setting
Default:
9 (240 seconds)
(see table below)