manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

Share
Download
Panasonic DBS-2.3-400 Programming Manual Download Page 176

Chapter 1. System Programming (FF1)

Section 400-Programming

Page 1-132

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

DISA Outbound Call ID Code 2

Software Version:   All Versions
Address:   FF1  6#  2#  (0000-9999)#

Description

Once a caller has dialed in on the DISA trunk and accessed intercom dial 
tone, he/she can access a trunk line by dialing #7, then the ID code set in this 
address (9999 by default), then 9 or 81-86 to access the MCO trunk.

Programming

To set DISA Outbound Call ID Code 2 ...  

To reset DISA Outbound ID Code  2 to default “9999” ...

Related Programming

DISA Auto Answer:   FF2  (Trunk)#  11#  (0 or 1)#

DISA Inbound Call ID Code:   FF1  5#  (0000-9999)#

DISA Outbound Call ID Code 1:   FF1  6#  1#  (0000-9999)#

DISA Start Time:   FF2  (Trunk)#  19#  (HHMM)#

DISA End Time:   FF2  (Trunk)#  20#  (HHMM)#

Notes

DISA Limitations --

1) A 16-second timer is set between the dialing of the DISA Outbound ID 

Code.  If a time-out results, the DISA call is treated as a normal call.

2) The DBS supports up to two valid 4-digit DISA Outbound ID Codes, so 

that you can track two different groups of DISA callers on SMDR reports.

3) Accessing trunks via DISA can take place only on trunk (MCO) groups.

4) LCR (Least Cost Routing) is not supported on DISA trunks.

5) Trunk calling with DISA will override all TRS.

FF1  6#  2#  (0000-9999)#

  

4-Digit DISA Outbound ID Code 2
(Default:  

9999

)

FF1  6#   2#  CONF  ON/OFF

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands