Panasonic DBS-2.3-400, Programming Manual

Page: 146 / 578

Chapter 1. System Programming (FF1) Section 400-Programming
Page 1-102 DBS Manual - Revised April 2000 DBS-2.3/9.2-400
Extension Park Hold Recall Timer
Software Version: All Versions
Address: FF1 3# 9# (0-12)#
Description
If an extension parks a trunk call, the parked call will recall (start ringing at
the extension) if it is not picked up. This address determines how long the
parked call remains on hold before it recalls (140 seconds by default).
Programming
Table 1-16. Extension Park Hold Recall Timer values
Related Programming
Attendant Call Reversion Timer for CO Calls: FF1 3# 10# (0-12)#
Notes
Recall Treatment for CO Calls. If a trunk recall is unanswered, it will revert
to the Attendant phone after ringing for the amount of time set in the
Attendant Call Reversion Timer.
Setting Value
0 No recall
1 20 seconds
2 40 seconds
3 60 seconds
4 80 seconds
5 100 seconds
6 120 seconds
7 140 seconds
8 160 seconds
9 180 seconds
10 200 seconds
11 220 seconds
12 240 seconds
FF1 3# 9# (0-12)#
Extension Park Hold Recall Timer setting
Default:
7 (140 seconds)
(see table below)