manualshive.com logo in svg

Panasonic DBS-2.3-400, Programming Manual

The Panasonic DBS-2.3-400 Programming Manual is a comprehensive guide for users to efficiently navigate through the features and settings of this product. With step-by-step instructions, users can easily program their device for personalized usage. Download this manual for free at manualshive.com, your go-to destination for user manual downloads.

Share
Download
background image

Index-8

DBS Manual - Revised April 2000

DBS-2.3/9.2-400

Index

Section 400-Programming

inserting into Add digits (LCR) ............... 8-14
timer, automatic...................................... 1-105
timer, dialing .......................................... 1-111

Pay-For-Call Services--

restricting.................................................. 7-19

PBX--

access codes, automatic pause in.............. 1-66
access codes, creating............................... 1-65
automatic pause for .................................. 2-10
flash on REDIAL ..................................... 1-11
flash timer............................................... 1-112
LCR, using with ......................................... 8-5
trunk port type setting ................................ 2-7
unsupervised conference in ...................... 3-17

Permanent Call Forward--

target extension ........................................ 3-52
type ........................................................... 3-51

Pooled Trunks--

access, group "9" ........................................ 2-5
access, groups "81-86" ............................... 2-6
forced LCR on ............................................ 3-8
including in SSD numbers........................ 10-4
prime line pickup...................................... 3-15
selection, assigning to FF key .................... 5-7

Prime Line Pickup

...................................... 3-15

Private Trunk Line--

assigning to extensions............................... 2-9
copying restriction...................................... 9-3

PROG Key

................................................... 1-13

Programming Mode--

entering................................................. Intro-7
example entry ....................................... Intro-9
FF key sequence ........................................ xvii
ID code for entering ............................... 1-133
preparations for .................................... Intro-3
structure ................................................ Intro-6

PSD (Personal Speed Dial)--

copying restriction for FF keys .................. 9-5
directory, assigning to FF key .................... 5-6
display on large LCD phones ................... 3-21
displaying ................................................. 10-5
name assignments....................................... 6-5
numbers, assigning on extensions ............ 10-5
numbers, assigning to FF key..................... 5-6
permanent call forward point ................... 3-52

R

RAI (Remote Administration Interface)--

baud rate................................................... 1-64
modem card compatibility ....................... 1-64
remote programming with ......................... B-2
serial port settings .................................... 1-64

RAMCLR/RAMHOLD Switches

..........Intro-4

Range--

for extension ports ..................................... 3-1
for trunks.................................................... 2-1

Red Alarms (T1)--

counter ................................................... 1-178
detection................................................. 1-168
relay ....................................................... 1-183

REDIAL Key--

add digits (LCR) ...................................... 8-14
auto flash timer ...................................... 1-106
auto flash using ........................................ 1-11
automatic pause for PBX ......................... 2-10
auto-redial ................................................ 3-58
SSD display on......................................... 1-10

Release--

acknowledge timer for T1...................... 1-150
assigning to FF key .................................... 5-6

Reminder--

assigning to FF key .................................... 5-6

Remote Loopback for T1

......................... 1-165

Remote Programming--

commands in .............................................. B-2
ID code for ............................................. 1-129
resuming mode after .................................. B-3
through a CO or DISA Trunk .................... B-2
through a direct connection........................ B-1

Ring Assignments--

extensions (Day) ........................................ 4-3
extensions (Night 2)................................. 4-27
extensions (Night)...................................... 4-5
hunt groups (Day) ...................................... 4-4
hunt groups (Night 2)............................... 4-28
hunt groups (Night).................................... 4-6

Ring Cycle--

expansion timer, incoming calls ............ 1-110
illustration .............................................. 1-109

Ring Patterns--

for analog transfers (CPC-A) ................... 1-28
for analog transfers (CPC-AII/B) ............ 1-40
for extensions ........................................... 3-46
for inbound trunk calls ............................. 2-14
for SLT DISA .......................................... 1-44
for UNA terminals ................................... 1-68

Ringback Tone--

ML keys ................................................... 3-42

Summary of Contents for DBS-2.3-400



































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for DBS-2.3-400

NEC NEAX 2000IVS2 Retrofit Manual preview
NEAX 2000IVS2
Brand: NEC Pages: 34
NEC IPK II User Manual preview
IPK II
Brand: NEC Pages: 4
NEC DXE Series Instructions For The Customer preview
DXE Series
Brand: NEC Pages: 19
NEC NVM-2000 Manual preview
NVM-2000
Brand: NEC Pages: 17
NEC DSX-40 DEMO KIT Quick Start Manual preview
DSX-40 DEMO KIT
Brand: NEC Pages: 2
NEC AT-55 Quick User Manual preview
AT-55
Brand: NEC Pages: 2
NEC ELECTRA ELITE Manual preview
ELECTRA ELITE
Brand: NEC Pages: 22
Panasonic KX-TGP500 Quick Start Manual preview
KX-TGP500
Brand: Panasonic Pages: 30
Panasonic KX-TG6511 Operating Instructions Manual preview
KX-TG6511
Brand: Panasonic Pages: 18
Aastra Ascotel Office 135 Quick User Manual preview
Ascotel Office 135
Brand: Aastra Pages: 2
BT FREELANCE XD 5100 Quick Start Manual preview
FREELANCE XD 5100
Brand: BT Pages: 2
AGFEO T 11 Manual preview
T 11
Brand: AGFEO Pages: 16
ONE.TEL Magma 110 User Manual preview
Magma 110
Brand: ONE.TEL Pages: 47
ESI ORIGINAL IVX Installation Manual preview
ORIGINAL IVX
Brand: ESI Pages: 114
Topcom BUTLER 3501 User Manual preview
BUTLER 3501
Brand: Topcom Pages: 28
Nortel Business Series Terminal T7000 User'S Card preview
Business Series Terminal T7000
Brand: Nortel Pages: 4
VTech FS2615-2A User Manual preview
FS2615-2A
Brand: VTech Pages: 51
Swissvoice Avena 748 User Manual preview
Avena 748
Brand: Swissvoice Pages: 20

Brands by name

Popular brands

Load more brands