![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390076.webp)
Setting Sensing
74
ZW User's Manual
Setting Start Direction of Count Measurement Surfaces
When a number of measurement surfaces exists, start direction can be selected from NEAR side or FAR side.
It cannot set and display using Sysmac Studio.
Item
Setting item
Setting value
Description
Operation mode
Start direction of
count
measurement
surfaces
NEAR (default value)
Measurement surfaces are counted from NEAR side.
FAR
Measurement surfaces are counted from FAR side.
The setting of start direction of count measurement surfaces can also be set by the operating keys on the Sensor
Controller.
Setting Start Direction of Count Measurement Surfaces p.229
Example: NEAR
1 surface
2 surface
3 surface
4 surface
4 surface
3 surface
2 surface
1 surface
Example: FAR
Important
Note
Summary of Contents for ZW-C1*T
