![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390246.webp)
Setting the Output Conditions
244
ZW User's Manual
Setting Hold
Setting the Hold Mode
As an example, here is an explanation of the procedure for selecting the "PEAK" hold mode setting.
Operating procedure
Steps
Key operation
Display
Description
1
Press and hold the
key for two seconds to enter the FUN
mode.
2
Press the
/
key to select MEAS, then press the
key.
3
Press the
/
key to select TASK1, then press the
key.
4
Press the
/
keys to select "OUTPUT" and press the
key.
5
Press the
/
keys to select "HOLD" and press the
key.
6
Press the
/
keys to select "TYPE" and press the
key.
7
Set the hold mode.
PEAK: Peak
BOTTOM: Bottom
P-P: PEAK TO PEAK
AUTOPK: AUTO PEAK
AUTOBT: AUTO BOTTOM
AUTOPP: AUTO PEAK TO PEAK
AVE: AVERAGE
SAMPLE: Sampling
OFF: Through
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
In this example, select "PEAK" and press the
key.
8
Press the
key for two seconds to enter the RUN mode.
Summary of Contents for ZW-C1*T
