Omron ZW-C1*T, User Manual, Page: 86 / 322

Setting the Output Conditions
84
ZW User's Manual

Explorer pane : [Bank] | [(Bank Data Name)] (double click)

Edit pane : [Task Settings] icon ( )

Task Settings window : [Scaling]
Automatically Setting Scaling
Performing 1-point Scaling
Measurement is performed at one position, and offset values are set for that measured value.
The offset and increment/decrement inversion can be set.
Example: When displaying the distance to the sensing object
1
Select [Scaling].
2
Enter the correction value to [Span] and
[Offset].
Fixed scaling can also be executed by the operating keys on the Sensor Controller.
Performing Manual Scaling p.240
Item Setting item Setting value Description
Actual scaling
(one point) Set value -999.999999 to 999.999999 [mm] Correct the measured value, and set the value to display.
Scaling direction Inverse change The FAR side becomes a plus value.
Forward change The NEAR side becomes a plus value.
Note
4.5
4.5
Sensor head
Measured value:
4.5 mm
0 mm
Measuring center
distance
Sensing
object
Target display value:
Relative reference value
from the sensor with this
distance as the reference.
Default
display
Display value
(mm)
Measured value
(mm)