Setting the Output Conditions
242
ZW User's Manual
Performing 2-point Scaling
Performing 2-point Scaling p.86
Operating procedure
Steps
Key operation
Display
Description
1 to 6
For moving to "SCALE" - "AUTO", see steps 1 to 6 in p.240.
7
Press the
/
keys to select "2PT" and press the
key.
8
Press the
key when the main display shows "POINT1".
9
Set the measured value of point 1.
The current measured value is displayed on the main display and the
current setting value is displayed on the sub-display.
To edit numerical values, use the
/
/
/
keys.
Enter the setting value and then press the
key.
10
Press the
key when the main display shows "POINT2".
11
Set the measured value of point 2.
To edit numerical values, use the
/
/
/
keys.
Enter the setting value and then press the
key.
12
"OK/CAN" is displayed on the sub-display.
Press the
key to execute scaling or
key to cancel.
13
Press the
key for two seconds to enter the RUN mode.
Summary of Contents for ZW-C1*T
