![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390153.webp)
Parallel I/O connection
ZW User's Manual
151
6
Commun
ication
s with Exte
rnal De
vi
ces
Setting the Clamp Value for Analog Output
Set the clamp value to output when "Clamp" is selected as processing when measurement is not possible.
Explorer pane
: [Bank] | [(Bank Data Name)] (double click)
Edit pane
: [I/O Settings] icon (
)
I/O Setting Screen
: [Analog output]
2
Select the operation during non-
measurement at [Non-Measurement
Setting].
The operations for when measurement is not possible can also be set with key operations on the Sensor Controller.
Setting operation when measurement is not possible p.273
Item
Setting item
Setting value
Description
Analog output
Clamp output
When the analog output destination is set to current
MIN (approx. 3.4mA)/4 to 20mA (1mA increments)/
MAX (default value: approx. 21mA)
When the analog output destination is set to voltage
MIN (approx. -10.8V)/-10 to 10V (1V increments)/
MAX (default value: approx. 10.8V)
Select the analog current/voltage at
clamp output.
1
Set the operating mode to the FUN mode.
3-3 Switching operation modes p.57
2
Select the output value at [Output value
when clamp].
Note
Summary of Contents for ZW-C1*T
