![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390159.webp)
Parallel I/O connection
ZW User's Manual
157
6
Commun
ication
s with Exte
rnal De
vi
ces
When the setting for non-measurement is "CLAMP", if the sampling value is an abnormal value or an undetermined
value
*
, sampling is not executed. If sampling has been started, it is stopped. The output value is as follows.
• Hold the clamp value.
• If the previous hold value is not the clamp value, the GATE signal is output.
To start and continue sampling even if a sampling value is an abnormal value or an undetermined value, set "KEEP"
as the non-measurement setting.
*: After the start of measurement, if measurement results are not obtained the number of times required to take the
average, the measurement result is not applied.
Important
Summary of Contents for ZW-C1*T
