![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390105.webp)
Setting the Output Conditions
ZW User's Manual
103
4
Settings for
Func
tion
Setting the Zero Reset Type
Set the zero reset type.
Explorer pane
: [Bank] | [(Bank Data Name)] (double click)
Edit pane
: [Task Settings] icon (
)
Task Settings window : [Zero reset]
Item
Setting item
Setting value
Description
Zero reset
Zero reset type
Real value
Sets the measured value when a zero reset is executed to zero.
Hold value
Sets the measured value (hold value) when a zero reset is executed to zero.
This is enabled when hold measurement is performed.
1
Set [Status] to ON.
The zero reset type can be set only when [Status]
is set to ON.
2
Select the zero reset type from [Type].
The zero reset type can also be set by the operating keys on the Sensor Controller.
Setting the Zero Reset Mode p.250
Measurement of height
from reference surface
Zero reset
Reference A
Sensor head
Measurement of height
from reference surface
Zero reset
Hold A
(reference)
Direction of movement
Sensor head
Important
Note
Summary of Contents for ZW-C1*T
