Omron ZW-C1*T, User Manual, Page: 168 / 322

Parallel I/O connection
166
ZW User's Manual
Task Measurement Result Output
The following two output methods can be selected from.
• Measured value 1 mode (When measured values for multiple tasks are output consecutively)
The preset tasks are output in order for each of a certain cycle.
• Measured value 2 mode (When measured values for multiple tasks are output by BINARY_SEL input)
The tasks to output with binary output are selected with external input and the measurement data for those tasks is
output.
Measured value 1 mode (When measured values for multiple tasks are output consecutively)
The binary output results can be acquired when the GATE output is ON.
Explanation of operations (When the results for all tasks are output)
(1) The TASK1 results are output (judgment output and binary output).
(2) After the judgment result and binary data output, the GATE output is turned ON.
(3) The GATE signal output time after the GATE output is turned ON, the GATE output is turned OFF.
(4) After the binary output update cycle, the TASK2 results are output (judgment output and binary output).
(5) After the binary output update cycle, the TASK3 results are output (judgment output and binary output).
(6) After the binary output update cycle, the TASK4 results are output (judgment output and binary output).
(7) After binary output update cycle 2, the TASK1 results are output (judgment output and binary output).
Item Min. Max.
T0 Measurement cycle 0.5 ms Depends on the set conditions
T4 GATE signal rise time

0.2 ms
T5 GATE signal output time Setting value
(0.1 to 100.0 ms) Setting value
(0.1 to 100.0 ms)
T15 Binary output update cycle T0×Update cycle T0×Update cycle
T16 Binary output update cycle 2 T0×Update cycle×number of tasks
output T0×Update cycle×number of tasks
output
Which tasks to output results for can be selected.
Binary output object task selection input p.136
TASK3 result
010b
011b
(1) (2)
T0
T15
(3)
T4
(4) (5) (6) (7)
000b 001b 010b 010b 011b 000b 001b
T16
T5
ON
OFF
Judgment output
(HIGH/PASS/LOW)
Binary output
GATE output
BINARY OUT output
TASK4 result TASK1 result TASK2 result TASK3 result TASK4 result TASK1 result TASK2 result TASK3 result
Note