![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390273.webp)
Connecting Parallel I/O
ZW User's Manual
271
Senso
r con
trol
ler ope
ra
ti
ons
9
Settings for Judgment Output
Assigning judgment output
Assigning judgment output p.143
As an example, the following explains the procedure for outputting the judgment results for TASK1.
Operating procedure
5
Set the output time.
The current setting value is displayed on the sub-display.
Press
key to enter the editing mode, and the sub-display blinks.
To edit numerical values, use the
/
/
/
keys.
In this example, input "100", then press the
key.
6
Press and hold the
key for two seconds to enter the RUN mode.
Steps
Key operation
Display
Description
1
Press and hold the
key for two seconds to enter the FUN mode.
2
Press the
/
keys to select "I/O" and press the
key.
3
Press the
/
keys to select "JUDGE" and press the
key.
4
Press the
/
keys to select "OUTPUT" and press the
key.
5
Select the task for which to output the judgment result.
The current setting value is displayed on the sub-display.
Press
/
key to enter editing mode and the sub-display blinks.
In this example, select "TASK1" and press the
key.
6
Press the
key for two seconds to enter the RUN mode.
Steps
Key operation
Display
Description
Summary of Contents for ZW-C1*T
