![background image](http://html.mh-extra.com/html/omron/zw-c1-t/zw-c1-t_user-manual_1633390067.webp)
Setting Threshold Value
ZW User's Manual
65
3
Basic Operation
Explorer pane
: [Bank] | [(Bank Data Name)] (double click)
Edit pane
: [Task Settings] icon (
)
Task settings window : [Judgment]
• Hysteresis (hysteresis width) can also be set to threshold values. Set hysteresis when measured values are
dispersed around a threshold value, and judgments are unstable, to prevent chattering.
Setting Operation at Judgment Output p.144
• Threshold values can also be adjusted by directly entering values in the RUN mode.
This helps you to make fine adjustments without shutting down the system.
Changing Threshold Values p.227
1
Enter the [LOW threshold] and [HIGH thresh-
old].
Threshold Value Settings can also be set by the operating keys on the Sensor Controller.
9-10 Setting Threshold Value p.257
Important
Note
Summary of Contents for ZW-C1*T
