manualshive.com logo in svg

Oce VarioPrint 6180, User Manual

The Oce VarioPrint 6180 is a high-quality printing solution designed for efficient office operations. Enhance productivity with this versatile device by fully understanding its features and functions through the comprehensive user manual available for free download at manualshive.com. Master the Oce VarioPrint 6180, elevate your printing experience.

Share
Download
background image

The paper modules

Introduction

The paper trays contain the media that are required for the print jobs. The default configuration of
the machine contains 1 paper module with 4 paper trays.
• Two standard trays with a capacity of 600 sheets each.
• Two bulk trays with a capacity of 1,700 sheets each (or 3,400 A4/Letter sheets each when the

optional dual paper trays are installed)

Contact your local authorized dealer for more information about the dual paper trays.

You can add 1 or 2 more paper modules to the machine. Then the total number of paper trays is
extended to 8 or 12 respectively. You can find more information about the capacities of the paper
trays and the supported media size in the specification chapter of this manual.

You can also install a Flex-XL PIM paper input module. In this paper module the two bulk trays
are replaced by Flex-XL trays. A Flex-XL tray can contain media until media size 350 mm x 500
mm. You can install the Flex-XL PIM instead of a standard paper module or in combination with a
standard paper module. You can install a maximum of 3 paper modules. Contact your local
authorized dealer for more information about the Flex-XL PIM. See also 

Flex-XL paper input

module on page 29

.

This section describes the control panel on each paper module.

NOTE

You can use the control panel on the paper modules to open the paper trays and load the media.

However, the recommended way to open the paper trays and assign the media is via the

[Schedule] view. You can also open the paper trays and/or assign the media via the [Trays] view

(see

 Assign the media to a paper tray on page 212

).

The control panel

1

2

3

4

2

4

3

5

1

[1] The control panel on the paper modules

Each paper module contains a control panel next to the upper paper tray. The control panel
consists of 4 sections that correspond with the 4 paper trays. Each section displays the current
filling level of the corresponding paper tray. Furthermore, the control panel indicates whether the
media in the paper tray is assigned or not. The following table describes the various parts of the
control panel.

The paper modules

Chapter 2 - Explore the print system

19

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Reviews:

No comments

Related manuals for VarioPrint 6180

Canon BJC-S530D Quick Start Manual preview
BJC-S530D
Brand: Canon Pages: 96
Canon BJC-S500 Setup Instructions preview
BJC-S500
Brand: Canon Pages: 2
Canon BJC-S300 Setup Instructions preview
BJC-S300
Brand: Canon Pages: 2
Canon BJC-80 Specification preview
BJC-80
Brand: Canon Pages: 2
Canon BJC-6000 Series Setup Instructions preview
BJC-6000 Series
Brand: Canon Pages: 10
Canon BJC-55 Series Specification preview
BJC-55 Series
Brand: Canon Pages: 2
Canon BJC-5100 Series Technical Information preview
BJC-5100 Series
Brand: Canon Pages: 2
Canon BJC-50 Parts Catalog preview
BJC-50
Brand: Canon Pages: 4
Canon BJC-4400 Series Quick Start Manual preview
BJC-4400 Series
Brand: Canon Pages: 15
Canon BJC-3000 Series Quick Start Manual preview
BJC-3000 Series
Brand: Canon Pages: 8
Canon BJC-3000 Series Technical Information preview
BJC-3000 Series
Brand: Canon Pages: 2
Canon BJC-2100 Series Quick Start Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC S600 Setup Instructions preview
BJC S600
Brand: Canon Pages: 11
Canon BJC-2100 Series Simplified Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC-55 Series Service Manual preview
BJC-55 Series
Brand: Canon Pages: 206
Canon 900D - i Color Inkjet Printer Printing Manual preview
900D - i Color Inkjet Printer
Brand: Canon Pages: 30
Canon 8996A001 - i 455 Color Inkjet Printer Printing Manual preview
8996A001 - i 455 Color Inkjet Printer
Brand: Canon Pages: 4
Canon 820D - S Color Inkjet Printer Application Manual preview
820D - S Color Inkjet Printer
Brand: Canon Pages: 140

Brands by name

Popular brands

Load more brands