manualshive.com logo in svg

Oce VarioPrint 6180, User Manual

The Oce VarioPrint 6180 is a high-quality printing solution designed for efficient office operations. Enhance productivity with this versatile device by fully understanding its features and functions through the comprehensive user manual available for free download at manualshive.com. Master the Oce VarioPrint 6180, elevate your printing experience.

Share
Download
background image

Continue with step 2 when you select this option.

• Press [Continue].

The controller will use the PCL default media and continue the print job.
Note that this might be an incorrect media.

• Press [Cancel stream].

The print job is stopped. You can now solve the problem. It is most likely that you can solve the
problem on the host.

NOTE

Steps 2 and 3 apply only when you chose to assign a media.

2.

From the list of media, select the media that will be used as the media the controller is asking for
and press [OK].
Note that this might be an incorrect media.
The media will now be displayed with the name that is defined in the media catalog.

3.

Select the paper tray where you want to load the required media and press [OK].

4.

Load the media.

5.

Close the paper tray.

6.

Press [OK].
Now you can assign other media or continue the print job.

Handle the media messages - How to handle the [Media message] in the tray-

to-media mode

Procedure

1.

A message on the control panel indicates that a media is missing. Select one of the following
actions as a response to the message.
• Press [Assign media].

Continue with step 2 when you select this option.

• Press [Continue].

The controller will use the PCL default media and continue the print job.
Note that this might be an incorrect media.

• Press [Cancel stream].

The print job is stopped. You can now solve the problem. It is most likely that you can solve the
problem on the host.

NOTE

The following steps apply only when you chose to assign a media.

2.

From the list of media, select the media that will be used as the media the controller is asking for
and press [OK].
Note that this might be an incorrect media.

3.

Select one of the memory locations of the logical-tray table to be used for the required media.
Note that the media that was previously allocated to that memory position in the setup will be
overwritten. Then that media will no longer be available to the transaction stream.
Now you can assign other media or continue the print job.

Handle the media messages - How to handle the [Media message] in the tray-to-media mode

186

Chapter 9 - Carry out print jobs

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Reviews:

No comments

Related manuals for VarioPrint 6180

Canon imagePROGRAF W8400 Driver Manual preview
imagePROGRAF W8400
Brand: Canon Pages: 24
Canon Super G3 FAX Board-T1 Portable Manual preview
Super G3 FAX Board-T1
Brand: Canon Pages: 16
Canon imagePROGRAF TZ-30000 Setup Manual preview
imagePROGRAF TZ-30000
Brand: Canon Pages: 66
Canon imagePROGRAF W7200 Setup Manual preview
imagePROGRAF W7200
Brand: Canon Pages: 126
Canon imagePROGRAFi iPF840 series Basic Manual preview
imagePROGRAFi iPF840 series
Brand: Canon Pages: 149
Canon IPF850 Basic Manual preview
IPF850
Brand: Canon Pages: 166
Canon iP4000 - PIXMA Photo Printer Start Here preview
iP4000 - PIXMA Photo Printer
Brand: Canon Pages: 2
Canon iP4000 - PIXMA Photo Printer Instruction Manual preview
iP4000 - PIXMA Photo Printer
Brand: Canon Pages: 3
Canon Finisher-U1 Installation Procedure preview
Finisher-U1
Brand: Canon Pages: 21
Olympus P 400 Firmware Upgrade Manual preview
P 400
Brand: Olympus Pages: 3
Canon BW Remote Operators Software Kit-A1 Service Manual preview
BW Remote Operators Software Kit-A1
Brand: Canon Pages: 20
Canon imageRUNNER 2420 Trouble Error Codes List preview
imageRUNNER 2420
Brand: Canon Pages: 30
Canon IPF850 Service Manual preview
IPF850
Brand: Canon Pages: 51
Canon imageCLASS LBP325dn Service Manual preview
imageCLASS LBP325dn
Brand: Canon Pages: 252
Xerox 770 Safety Manual preview
770
Brand: Xerox Pages: 24
VASTEX V-1000 Installation And Operating Insctructions preview
V-1000
Brand: VASTEX Pages: 2
Canon PIXMA MX892 Getting Started Manual preview
PIXMA MX892
Brand: Canon Pages: 4
Oki C9650 Series User Manual preview
C9650 Series
Brand: Oki Pages: 126

Brands by name

Popular brands

Load more brands