Oce VarioPrint 6180 User Manual Download Page 57

Page: 57 / 306

The Default Settings for [Print]

The default [Print] settings

Workflow profile

[Print] settings

[Confirm start of job]

[Check first set]

[Standard]

[Off]

[As in job]

[Job by job]

[On]

[As in job]

[Check and print]

[Off]

[On]

[Manual planning]

[Off]

[As in job]

[Unattended]

[Off]

The Default Settings for [Output]

The default [Output] settings

Workflow profile

[Output] set‐
tings

[Next output
tray]

[Offset stacking]

[Tray linking]

[Standard]

[After each job] [Sets (as in job)]

[On]

[Job by job]

[After each job] [Sets (as in job)]

[On]

[Check and print]

[After each job] [Sets (as in job)]

[On]

[Manual planning]

[After each job] [Sets (as in job)]

[On]

[Unattended]

[When tray is
full]

[Banners]

[Off]

Values and effects of the settings

The following table describes the effects of the various values of the settings.

Values and effects of the settings

Setting

Values

Effect

[Destination of
print job]

[Scheduled jobs]

The jobs are immediately sent to the list of [Scheduled
jobs].

[Waiting jobs]

The jobs are sent to the list of [Waiting jobs]. You can
manually define the order in which the jobs will be prin-
ted.

[As in job]

The jobs are sent to the destination that is defined in the
job ticket or in the copy job.

[Destination of
DocBox job]

[Scheduled jobs]

The jobs are immediately sent to the list of [Scheduled
jobs].

[Waiting jobs]

The jobs are sent to the list of [Waiting jobs]. You can
manually define the order in which the jobs will be prin-
ted.

Work with the Workflow Profiles

Chapter 5 - Prepare the print system

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands

Oce VarioPrint 6180, User Manual

Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands