Oce VarioPrint 6180 User Manual Download Page 51

Page: 51 / 306

[11] Job name truncation

1. Touch [System] -> [Setup] -> [Job name truncation].
2. Indicate how you want to shorten the job name.
3. Touch [OK].

Adjust the readability of the control panel

You can adjust the brightness and contrast of the control panel screen. Use the automatic or
manual adjustment.

Setting

Description

[Auto adjust]

The screen of the control panel will automatically set the correct
ratio of brightness and contrast.

[Brightness]

You can increase or decrease the brightness from level 20 to 100
in steps of one. The higher the value, the higher the brightness.

[Contrast]

You can increase or decrease the contrast from level 10 to 100 in
steps of one. The higher the value, the higher the contrast.

Adjust the control panel

Chapter 5 - Prepare the print system

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands

Oce VarioPrint 6180, User Manual

Search results

Summary of Contents for VarioPrint 6180

Reviews:

Related manuals for VarioPrint 6180

Brands by name

Popular brands