manualshive.com logo in svg

Oce VarioPrint 6180, User Manual

The Oce VarioPrint 6180 is a high-quality printing solution designed for efficient office operations. Enhance productivity with this versatile device by fully understanding its features and functions through the comprehensive user manual available for free download at manualshive.com. Master the Oce VarioPrint 6180, elevate your printing experience.

Share
Download
background image

Optional finishers and other devices

Form Assist Module

Introduction

The printer allows you to print on special media with irregular thickness. Examples of such media
are media with glued-on (membership or bank) passes, folded media, or media with a slip
attached. When you load a stack of special media with irregular thickness into the paper tray, the
stack will tilt. When the stack tilts too much, it may cause paper jams. Therefore, you can only
load a limited amount of special media with irregular thickness into the paper tray.

The Form Assist Module is a device you can insert in your bulk paper tray without modifying your
paper tray. It allows you to increase the media input capacity. When you use the Form Assist
Module, your stack of special media will stay straight. This allows you to load more media into
the paper tray and to increase your productivity. The Form Assist Module is delivered with
'Installation instructions'.

IMPORTANT

The variety of special media makes it difficult to predict whether the printer can process the

special media you want to use. Before you begin, test the special media and print a limited

number of sheets.

Paper input capacity

Paper tray with Form Assist Module Paper tray without Form Assist

Module

Paper with irregu-
lar thickness (num-
ber of sheets)

100 - 200

20 - 50

Optional finishers and other devices

Chapter 2 - Explore the print system

23

Océ VarioPrint 6000 line

Summary of Contents for VarioPrint 6180



















































































































































































































































































































Reviews:

No comments

Related manuals for VarioPrint 6180

Olympus P-10 Instruction preview
P-10
Brand: Olympus Pages: 2
Qilive Q.3622 Instruction Manual preview
Q.3622
Brand: Qilive Pages: 398
Xerox ColorQube 8580 System Administrator Manual preview
ColorQube 8580
Brand: Xerox Pages: 93
Xerox C235 Safety, Regulatory, Recycling, And Disposal Reference Manual preview
C235
Brand: Xerox Pages: 36
Xerox Copycentre C118 Evaluator Manual preview
Copycentre C118
Brand: Xerox Pages: 12
Xerox 7400DN - Phaser Color LED Printer Accessories Manual preview
7400DN - Phaser Color LED Printer
Brand: Xerox Pages: 3
Xerox 4890 Advanced Product Reference preview
4890 Advanced
Brand: Xerox Pages: 136
Xerox 4250 - WorkCentre - Copier Secure Installation And Operation preview
4250 - WorkCentre - Copier
Brand: Xerox Pages: 4
Xerox 4250 - WorkCentre - Copier Brochure & Specs preview
4250 - WorkCentre - Copier
Brand: Xerox Pages: 4
Xerox ColorQube 9201 Quick Manual preview
ColorQube 9201
Brand: Xerox Pages: 8
Xerox 4150 - WorkCentre B/W Laser Secure Installation And Operation preview
4150 - WorkCentre B/W Laser
Brand: Xerox Pages: 4
Xerox 4150 - WorkCentre B/W Laser Installation Instructions Manual preview
4150 - WorkCentre B/W Laser
Brand: Xerox Pages: 40
Xerox 4150 - WorkCentre B/W Laser Getting Started Manual preview
4150 - WorkCentre B/W Laser
Brand: Xerox Pages: 38
Xerox 4150 - WorkCentre B/W Laser User Manual preview
4150 - WorkCentre B/W Laser
Brand: Xerox Pages: 201
Xerox 4150 - WorkCentre B/W Laser Evaluator Manual preview
4150 - WorkCentre B/W Laser
Brand: Xerox Pages: 24
Xerox 4118P - WorkCentre B/W Laser Quick Start Manual preview
4118P - WorkCentre B/W Laser
Brand: Xerox Pages: 2
Xerox 3635MFP - Phaser B/W Laser System Administration Manual preview
3635MFP - Phaser B/W Laser
Brand: Xerox Pages: 212
Xerox 3300MFP - Phaser B/W Laser Specifications preview
3300MFP - Phaser B/W Laser
Brand: Xerox Pages: 4

Brands by name

Popular brands

Load more brands