NEC Express5800/53La, User Manual, Page: 154 / 314

5-34 Installing the Operating System with Express Setup
Re-installing the Operation System if Multiple Logical Drives Exist
Before Re-installing the Operation System
Be sure to make backup copies before re-installing the operation system just in case.
Re-installing the Operation System
1.
Start the clean installation following the procedure described in this manual.
2.
Specify the partition in which you want to install the operating system when the following
message appears:
<Windows 7>
Where do you want to install Windows?
<Windows XP>
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP and DOWN ARROW keys to select an item in the list.
* Cannot modify the drive letter of your system or boot volume. Confirm the proper drive
letter is assigned and then, continue the setup.
IMPORTANT: Windows 7
When you install the Windows OS in the environment with which
several hard disk drives are connected, more than one hard disk drives
are displayed as installation target. In this case, displayed sequence or
number may not correspond with the sequence of the hard disk drive
that connected with drive bay.
Distinguish the hard disk drive for installation by displayed disk
capacity or the size of partitions. If you select wrong hard disk drive,
the existing contents may be deleted unexpectedly.
Pay enough attention when you select the hard disk drive for
installation.
Refer to following Microsoft web-site for more details.
http://support.microsoft.com/kb/937251/en-us
3.
Continue the clean installation again following the procedure described in this manual.
4.
The drive letter of the re-installed system may differ from the one of the previous system.
If you need to modify the drive letter, modify it according to the "Procedure for
Modifying the Drive Letter".