NEC Express5800/53La, User Manual, Page: 82 / 314

4-10 Configuring Your Workstation
Available options in this menu are listed below.
Option Parameter Description Your Setting
System Time HH:MM:SS Set the system time.
System Date MM/DD/YYYY Set the system date.
Hard Disk Pre-Delay [Disabled]
3 seconds
6 seconds
9 seconds
12 seconds
15 seconds
21 seconds
30 seconds
When accessing the internal hard disk
drive for the first time during POST,
the system waits for the specified time
until the drive becomes ready.
Specify a desired value appropriate for
the hard disk drive that may stall when
accessed before initialization.
SATA Port 0
SATA Port 1
SATA Port 2
SATA Port 3
SATA Port 4 – Displays the type of devices
connected to each port.
Leave the submenu items as they are
at the shipment.
Language [English (US)]
JP Select which language BIOS SETUP
displays.
[ ]: Factory-set
IMPORTANT:
Make sure that the date and time shown on BIOS are
correct. Check and adjust the system clock before the operation if any
of the following conditions is applicable.
„
After carriage of device
„
After storage of device
„
After the device is entered into the pause state under the
environmental condition enduring device operation (temperature:
10°C - 35°C, humidity: 20% - 80%)
Check the system clock at the rough rate of once per month. When the
system clock is installed in a system requiring high time precision, it is
recommended to use a time server (NTP server).
If the system clock is remarkably delayed or advanced as the passage of
time in spite of adjustment, contact your service representative for
maintenance.