NEC Express5800/53La, User Manual, Page: 104 / 314

4-32 Configuring Your Workstation
Operating Procedures for LSI Software RAID Configuration Utility
Creating/Adding Configuration
Run LSI Software RAID Configuration Utility
Create configuration information (pack/virtual drive settings)
Check the virtual drive settings
Initialize virtual drive
Perform Consistency Check
Exit LSI Software RAID Configuration Utility
1.
Run LSI Software RAID Configuration Utility.
2.
Select [Configure]
→
[New Configuration] from the TOP menu.
Select [View/add Configuration] to add configuration.
IMPORTANT:
„
Creating a configuration using [New Configuration] menu clears the
existing configuration information. To add configuration
information to the existing configuration, select [View/Add
Configuration].
„
You cannot create Spanning of RAID1, or set the virtual drive
capacity on [Easy Configuration] menu.
Use [New Configuration] or [View/Add Configuration] instead.
„
[Perform Consistency Check] is not required for RAID0.