![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556333.webp)
NovaScale R620 User Guide
Installing ft Remote Management Card
Follow the procedures below and install ft Remote Management Card.
1.
Remove CPU/IO module referring page 8-11.
TIPS:
If PCI board is already installed to the CPU/IO module, remove the PCI board referring to page 8-33.
2.
Remove PCI rear bracket installed to the CPU/IO module as a
standard with two screws.
PCI rear bracket
3.
Remove the blank cover for LAN connector of ft Remote Management
Card. Grab the top and bottom of the blank cover to unlock and remove
it.
Blank cover for
LAN connector
4.
Install ft Remote Management Card to PCI rear bracket with one screw.
ft Remote
Management
Card
5.
Check the slot for ft Remote Management Card and remove the connector cap installed in the slot.
IMPORTANT:
Keep and store the removed connector cap with care.
8-29
Summary of Contents for Bull NovaScale R620 Series
