NEC Bull NovaScale R620 Series, User Manual

Page: 160 / 346

NovaScale R620 User Guide
When you click the icon for editing [ ], the window for editing appears as shown below.
c
d
e
f
g
h
(1)
Specify the HTTP port number.
(2)
Specify whether or not to enable SSL communication. If you select the check box for enabling, connection by
HTTPS (SSL enabled) is enabled. Clear the check box if you want to disable SSL.
TIPS:
It is recommended to use connection by the encrypted HTTPS protocol unless you have any specific reason
such as SSL cannot be used. By default, this option is disabled.
(3)
Specify the SSL port number.
(4)
Specify the login trial period during which you can try login again if you have failed to login.
(5)
Specify the number of login retries. If the number of retries exceeds the number specified here during the period
specified in (4), login retries will be rejected for the time period specified in (6).
(6)
Specify the time period during which login is rejected.
TIPS:
Though the three steps mentioned above are effective in blocking automatic unauthorized logins, they do not
completely block such logins.
If you click [Default], the default values for HTTP port number, SSL port number, login trial period, number of login
retries and the account lock period are displayed. The SSL check box configuration remains the same.
When you click [OK], all of what you have set will be written into the BMC.
When you click [Cancel], the editing window closes without saving what you have edited.
4-61