NEC Bull NovaScale R620 Series User Manual Download Page 244

Page: 244 / 346

NovaScale R620 User Guide

Updating from ESMPRO Manager Menu

Update firmware as follows:

Select [Tools]

→

[BMC FW Update Utility] from the Operation

Window’s menu.

The [BMC FW Update] dialog box appears.

Enter the device name and click [OK].

The [Execution Check] dialog box appears.

Store the firmware in the directory specified by [Location].

The storage area may be modified. See "Change of Update Data Storage
Destination " described later.

Click [OK].

Run firmware update.

The advance of the update appears during update.

At the termination of update, the update result is displayed.

Click [OK].

5-70

Summary of Contents for Bull NovaScale R620 Series



























































































































































































































































































































































Search results

Summary of Contents for Bull NovaScale R620 Series

Reviews:

Related manuals for Bull NovaScale R620 Series

Brands by name

Popular brands

NEC Bull NovaScale R620 Series, User Manual

Search results

Summary of Contents for Bull NovaScale R620 Series

Reviews:

Related manuals for Bull NovaScale R620 Series

Brands by name

Popular brands