![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556116.webp)
NovaScale R620 User Guide
Server
Move the cursor onto [Server] to display the Server menu.
The following describes options you can configure in the Server menu and their functions.
Select an option with the "
►
" mark and press
Enter
to display its submenu.
Refer to the table below for information on options.
Option Parameter
Description
Thermal
Sensor
[Disabled]
Enabled
Enable or disable the thermal sensor functions.
BMC IRQ
Disabled
[IRQ 11]
Set the IRQ of BMC interruption.
Post Error
Pause
[Disabled]
Enabled
Set whether or not to pause POST at the end of POST if an error has occurred
during POST execution.
AC LINK
Stay Off
[Last State]
Power On
Specify the AC LINK feature by selecting the status of the power supply unit of
the server when the AC power supply restarts. (See the table on the next page
for details.)
Power ON
Delay Time
[0]-255
Configure the DC ON delay time if AC LINK is set to “Power On” or “Last State”
(unit: second).
[ ]: Factory-set
* “Console Redirection” is shown only when the ft Remote Management Card is installed. (Installed in standard for
R620-MR model)
The table below lists how selections for "AC LINK" determine the power status of the server when the power supply to
the server restarts.
Parameter
State before powered off
Stay Off
Last State
Power On
In
service
Off On On
Out of service (DC power: Off)
Off
Off
On
Forced
shutdown
*
Off Off On
* Pressing the POWER switch for over four seconds shuts down the power to the server.
4-17
Summary of Contents for Bull NovaScale R620 Series
