NEC Bull NovaScale R620 Series, User Manual

Page: 98 / 346

NovaScale R620 User Guide
VGA DRIVER
Changing the Color Quality of Display to 32 Bit
The default color quality of the graphics driver is set to 16 bits for the NEC Express5800/ft series.
The server may (rarely) display the following message when accessing a floppy disk, and be unable to access the floppy
disk. To prevent that from happening, set the default color quality to 16 bit.
The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded
and that the volume is not corrupted.
Even if this message is displayed and the server becomes unable to access the floppy disk, the processing can be
completed by accessing the floppy disk again.
If you need to change the color quality to 32 bit knowing this limitation, apply a special graphic driver as described
below:
(1) Log on to Windows 2003 as a user with administrator authority.
(2) Set the “EXPRESSBUILDER” CD into the CD-ROM drive.
(3) From the Start menu, select [Run...]. The [Run] dialog box appears.
(4) Enter “D:\HAS\W2K3\GA32SET.BAT” in the “Open” box (replace “D” with the drive letter of the CD-ROM
drive), and click [OK].
Restart the server.
To change the color quality to the standard (16 bit), perform the above steps but run “GA16SET.BAT” in (4) instead of
“GA32SET.BAT.”
3-39