NEC Bull NovaScale R620 Series User Manual Download Page 334

Page: 334 / 346

NovaScale R620 User Guide

Insert ft Remote Management Card slowly against the connecting part to the slot board on the motherboard.

Insert the connecting part of the card against the slot and secure it with two screws.

IMPORTANT:

If you have trouble installing the card, remove the card once and install
it again. Be careful since the card gets damaged if you press it too
hard.

TIPS:

If PCI board is removed in the first step, remount it referring to page
8-32.

Install CPU/IO module referring to page 8-13.

Turn ON the power by pressing the POWER switch of installed CPU/IO module.

Removing ft Remote Management Card

Removal of PCI riser card follows the reverse procedure of the installation and remove the connector cap.

8-30

Summary of Contents for Bull NovaScale R620 Series



























































































































































































































































































































































Search results

Summary of Contents for Bull NovaScale R620 Series

Reviews:

Related manuals for Bull NovaScale R620 Series

Brands by name

Popular brands

NEC Bull NovaScale R620 Series, User Manual

Search results

Summary of Contents for Bull NovaScale R620 Series

Reviews:

Related manuals for Bull NovaScale R620 Series

Brands by name

Popular brands