NovaScale R620 User Guide
7-28
HASIPMI-related logs are recorded in the system event log:
The following event logs may be recorded during the system operation. These logs are recorded when
the software that access to BMC could not receive response from BMC within a given period of time.
There is no problem to the system by this warning.
Source:
HASIPMI
Type:
Information
Event ID:
22
Description: IPMI driver detected the response timeout of BMC.
Process = (Although Primary BMC is ready)
Source:
HASIPMI
Type:
Information
Event ID:
22
Description: IPMI driver detected the response timeout of BMC.
Process = (Secondary BMC is still running)
ESM HAS Storage Service-related logs are recorded in the system event log:
Even though the mirror volume is actually built, when the system is highly loaded, the following
event logs may be recorded repeatedly. Since the system is highly loaded, the status of SCSI slot and
mirror disk cannot be retrieved, an incorrect status is retrieved temporally, and these logs are recorded.
If you can verify that the mirror volume is established, there is no problem, so ignore them.
Source:
ESM HAS Storage Service
Type:
Warning
Event ID:
601
Source:
ESM HAS Storage Service
Type:
Information
Event ID:
602
Source:
ESM HAS Storage Service
Type:
Information
Event ID:
402
The following event logs may be recorded during the system operation. This is caused because there
are internally two types of
“
Empty
”
status that shows that disks are not loaded. For example, if disks
do not exist in Slot 1 and Slot 4,
“
Empty
”
simply indicates information. Also, if the disk where a
volume is not created exists in Slot 4,
“
Empty
”
of Slot 1 is just at the information level. If a simple
volume is created on the disk of Slot 4,
“
Empty
”
of Slot 1 is treated as the warning level to secure the
redundancy. In this case, check the volume creation status, and configure the mirror volume.
Source:
ESM HAS Storage Service
Type:
Warning
Event ID:
401
Description: Status of the SCSI Slot (ID:41/[Slot Number]) has changed from Empty to Empty.
[Slot Number]: a number between 0 and 5
Source:
ESM HAS Storage Service
Type:
Information
Event ID:
402
Description: Status of the SCSI Slot (ID:41/[Slot Number]) has changed from Empty to Empty.
[Slot Number]: a number between 0 and 5
The following event log may be recorded while the server is starting. To start the server, start one
module and then another one, and make them duplex. For this reason, if only one module has been
started but the other one is starting, the status of the SCSI adapter and the bus temporarily becomes
Simplex and Offline respectively. There is no problem if each status changes to Duplex after the
duplex operation completes. Because of this, right after the server is started and if the status changes
to Duplex when the duplex operation completes, there is no problem.
Summary of Contents for Bull NovaScale R620 Series
