NEC Bull NovaScale R620 Series, User Manual

Page: 106 / 346

NovaScale R620 User Guide
Menu and Parameter Descriptions
The SETUP utility has the following six major menus:
„
Main
„
Advanced
„
Security
„
Server
„
Boot
„
Exit
To configure detailed settings of functions, select a submenu from the above menus. Below describes configurable
functions and parameters and the factory settings displayed in the screen for each menu.
Main
Start the SETUP utility to display the Main menu.
When you select a menu with the “ ► ” mark and press the
Enter
key, its submenu appears.
<Example>
Available options in the Main menu and descriptions are listed below.
Option Parameter Description
System Time HH:MM:SS Specify the system time.
System Date MM/DD/YYYY Specify the system date.
[ ] factory - set
IMPORTANT:
Check and adjust the system clock before operation in the following conditions.
- After transporting the equipment
- After storing the equipment
- After the equipment halt under the conditions which is out of the guranteed environment conditions (Temperature:
10 to 35°C, Humidity: 20 to 80%).
Check the system clock once in a month. It is recommended to operate the system clock using a time server (NTP
server) if it is installed on the system which requires high level of time accuracy. If the system clock goes out of
alignment remarkably as time goes by, though the system clock adjustment is performed, contact your sales agent.
4-7