![background image](http://html1.mh-extra.com/html/nec/bull-novascale-r620-series/bull-novascale-r620-series_user-manual_3916556226.webp)
NovaScale R620 User Guide
Procedure in ESMPRO Manager
Start
1.
Select the target component in the [ft] tree.
2.
Check the current state with the "State" display on the target component screen.
3.
Click the [Bring Up] button in the [Maintenance] screen for the target component.
A certain time is required for the start.
The start result can be confirmed by "State" on the target component screen. The result of the start operation
is reported by the server as an alert.
CHECK:
When starting a stopped IO module, diagnostics of the CPU/IO modules are automatically performed. The
IO module is started after the diagnostics.
Stop
Perform the procedure below before replacing a component.
1.
Select the target component in the [ft] tree.
2.
Check the current state with the "State" display on the target component screen.
3.
Click the [Bring Down] button in the [Maintenance] screen for the target component.
A certain time is required for the stop.
The stop result can be confirmed by "State" on the target component screen. The result of the stop operation
is reported by the server as an alert.
CHECK:
When stopping IO module, check that the status of Ethernet is “Duplex” on ESMPRO Manager. Do not
stop the IO module especially when LAN is connected only to the IO module on that side.
Sample screen of ESMPRO Manager 1
[Maintenance] screen of CPU module
[CPU Module] – [CPU Module] – [Maintenance]
5-52
Summary of Contents for Bull NovaScale R620 Series
