NEC Bull NovaScale R620 Series, User Manual

Page: 142 / 346

NovaScale R620 User Guide
The following is a configuration screen for LAN1 (CPU/IO module #0). Specify an IP address to use. Make
settings for LAN2 (CPU/IO module #1) in the same manner.
For the settings to take effect, you need to execute [OK] on the previous menu, “BMC Configuration” window.
TIPS:
To disable the remote management console function, make the following settings from the
EXPRESSBUILDER CD-ROM. Load the EXPRESSBUILDER CD-ROM on the server, and from the main
menu, select [Tools]
→ [System Management] → [Set FT Remote Management Card (LAN1/LAN2)]. Select
[Disable] on [Remote Management Console] and register the setting. The host name, the domain name, and the
IP address cannot be modified on this screen.
The image below shows the setting screen for LAN1 (CPU/IO module #0).
If you use remote management for the first time, the “Waning - Security” dialogue box as shown below may be
displayed. Check the message, and then click [Yes] [No], or [Always]. Then you will see the login page. If you are not
sure, click [No].
4-43