NEC Bull NovaScale R620 Series, User Manual

Page: 156 / 346

NovaScale R620 User Guide
- LAN
c
d
e
(1)
The MAC address of the BMC
(2)
Lets you choose whether or not to acquire an IP address automatically by DHCP.
(3)
Lets you make the IP address settings if the address is not acquired automatically by DHCP. If the address is
acquired automatically by DHCP, the data acquired is shown here.
IMPORTANT:
„ If you change the IP address, the current connection will be disconnected when the BMC settings are completed
by clicking OK. Close the window once, and then login again by entering the newly set IP address (or host
name) in the browser.
„ The login page remaining on the browser is the page you accessed by using the old address. You cannot use it to
login.
„ When you configure “default gateway”, the gateway, the server, the management PC should be in a state where
communication over network is available.
„ If you make the settings in a state where communication is not available, you need to switch on/off the AC of the
server in a state where the gateway, the server and the management PC can be communicated over the network.
4-57